Inlet Seals for GC Injectors

GC Inlet Seals

A gas chromatography (GC) inlet seal is designed to create a secure, leak-tight connection between the inlet body and the ferrule of the capillary column. Even minor leaks within a split/splitless GC inlet can compromise system performance by lowering sensitivity, increasing background noise, and contributing to greater column bleed. The seal plays a critical role in eliminating potential microleaks along the flow path. By forming a reliable seal at the base of the inlet, it helps maintain a stable connection to the analytical column.

70 Producten

Replacement Inlet Seals, 1.2 mm, Stainless Steel, for Agilent GCs, pk.2

Restek Replacement Inlet Seals, 1.2 mm, Stainless Steel, for Agilent GCs, pk.2The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.Note: The 1.2 mm inlet seal is recommended when installing two columns using a two-hole Vespel/graphite ferrule.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20390

EUR 62.00

Beschikbaar op korte termijn

Replacement Inlet Seals, 1.2 mm, Stainless Steel, for Agilent GCs, pk.10

Restek Replacement Inlet Seals, 1.2 mm, Stainless Steel, for Agilent GCs, pk.10The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.Note: The 1.2 mm inlet seal is recommended when installing two columns using a two-hole Vespel/graphite ferrule.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20391

EUR 265.00

Beschikbaar op korte termijn

Inlet Seals, 1/16" SS for Agilent GCs, pk.10

Restek Inlet Seals, 1/16" Stainless Steel for Agilent GCs, pk.10The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.Note: The 1.2 mm inlet seal is recommended when installing two columns using a two-hole Vespel/graphite ferrule.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20393

EUR 265.00

Beschikbaar op korte termijn

Inlet Seals, 0.8mm Siltek® Cross Disk for Agilent GCs, pk.10

Cross-Disk Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.10

Restek Cross-Disk Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.10To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20474

EUR 376.00

Beschikbaar op korte termijn

Inlet Seals, 0.8mm Siltek® Cross Disk for Agilent GCs, pk.2

Cross-Disk Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.2

Restek Cross-Disk Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.2To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20475

EUR 85.00

Beschikbaar op korte termijn

Inlet Seals, 0.8mm Gold Plated Cross Disk for Agilent GCs, pk.10

Cross-Disk Inlet Seals, 0.8 mm, Gold-Plated, for Agilent GCs, pk.10

Restek Cross-Disk Inlet Seals, 0.8 mm, Gold-Plated, for Agilent GCs, pk.10To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20476

EUR 371.00

Beschikbaar op korte termijn

Inlet Seals, 0.8mm Gold Plated Cross Disk for Agilent GCs, pk.2

Cross-Disk Inlet Seals, 0.8 mm, Gold-Plated, for Agilent GCs, pk.2

Restek Cross-Disk Inlet Seals, 0.8 mm, Gold-Plated, for Agilent GCs, pk.2To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-20477

EUR 84.00

Beschikbaar op korte termijn

Cross-Disk Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.2

Restek Cross-Disk Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.2To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21009

EUR 90.00

Beschikbaar op korte termijn

Cross-Disk Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.10

Restek Cross-Disk Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.10To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21010

EUR 401.00

Beschikbaar op korte termijn

Inlet Seals, 1.2mm Siltek® Cross Disk for Agilent GCs, pk.2

Restek Inlet Seals, 1.2mm Siltek® Cross Disk for Agilent GCs, pk.2To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21011

EUR 91.00

Beschikbaar op korte termijn

Cross-Disk Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.10

Restek Cross-Disk Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.10To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal.- Ideal for high-flow split applications >500 mL/min on Agilent 5890 GCs.- Available in gold-plated or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21012

EUR 401.00

Beschikbaar op korte termijn

Inlet Seals 0.8mm Stainless Steel Dual Vespel Ring, pk.2

Dual Vespel Ring Inlet Seals, 0.8 mm, Stainless Steel, for Agilent GCs, pk.2

Restek Dual Vespel Ring Inlet Seals, 0.8 mm, Stainless Steel, for Agilent GCs, pk.2Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21238

EUR 60.00

Beschikbaar op korte termijn

Inlet Seals 0.8mm Stainless Steel Dual Vespel Ring, pk.10

Dual Vespel Ring Inlet Seals, 0.8 mm, Stainless Steel, for Agilent GCs, pk.10

Restek Dual Vespel Ring Inlet Seals, 0.8 mm, Stainless Steel, for Agilent GCs, pk.10Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21239

EUR 252.00

Beschikbaar op korte termijn

Inlet Seals 0.8mm Gold-Plated Dual Vespel Ring, pk.2

Inlet Seals 0.8mm Gold-Plated Dual Vespel Ring for Agilent GCs, pk.2

Restek Inlet Seals 0.8mm Gold-Plated Dual Vespel Ring for Agilent GCs, pk.2Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21240

EUR 77.00

Beschikbaar op korte termijn

Inlet Seals 0.8mm Gold-Plated Dual Vespel Ring, pk.10

Inlet Seals 0.8mm Gold-Plated Dual Vespel Ring for Agilent GCs, pk.10

Restek Inlet Seals 0.8mm Gold-Plated Dual Vespel Ring for Agilent GCs, pk.10Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21241

EUR 345.00

Beschikbaar op korte termijn

Inlet Seals 0.8mm Siltek Dual Vespel Ring, pk.2

Dual Vespel Ring Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.2

Restek Dual Vespel Ring Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.2Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21242

EUR 78.00

Beschikbaar op korte termijn

Inlet Seals 0.8mm Siltek Dual Vespel Ring, pk.10

Dual Vespel Ring Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.10

Restek Dual Vespel Ring Inlet Seals, 0.8 mm, Siltek Treated, for Agilent GCs, pk.10Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21243

EUR 348.00

Beschikbaar op korte termijn

Dual Vespel Ring Inlet Seals, 1.2 mm, Stainless Steel, for Agilent GCs, pk.10

Restek Dual Vespel Ring Inlet Seals, 1.2 mm, Stainless Steel, for Agilent GCs, pk.10Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21245

EUR 252.00

Beschikbaar op korte termijn

Inlet Seals 1.2mm Gold-Plated Dual Vespel Ring, pk.2

Dual Vespel Ring Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.2

Restek Dual Vespel Ring Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.2Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21246

EUR 77.00

Beschikbaar op korte termijn

Inlet Seals 1.2mm Gold-Plated Dual Vespel Ring, pk.10

Dual Vespel Ring Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.10

Restek Dual Vespel Ring Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.10Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21247

EUR 345.00

Beschikbaar op korte termijn

Inlet Seals 1.2mm Siltek Dual Vespel Ring, pk.2

Dual Vespel Ring Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.2

Restek Dual Vespel Ring Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.2Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21248

EUR 79.00

Beschikbaar op korte termijn

Inlet Seals 1.2mm Siltek Dual Vespel Ring, pk.10

Dual Vespel Ring Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.10

Restek Dual Vespel Ring Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.10Our patented dual Vespel ring inlet seal greatly improves injection port performance - it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal. The rings will not harm the critical seal in the injector body, or any other surface, and are outside the sample flow path.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.- Does not require a separate washer.- Requires less torque to seal.- Does not require retightening of reducing nut after several oven cycles.- Extends column lifetime by preventing oxygen from reaching the column.- Same price as the regular inlet seals with washers.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.

Art.-Nr.: RT-21249

EUR 350.00

Beschikbaar op korte termijn

Inlet Seals, 1.2mm Gold Plated for Agilent GCs, pk.2

Restek Inlet Seals, 1.2mm Gold Plated for Agilent GCs, pk.2The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.Note: The 1.2 mm inlet seal is recommended when installing two columns using a two-hole Vespel/graphite ferrule.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21305

EUR 76.00

Beschikbaar op korte termijn

Replacement Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.10

Restek Replacement Inlet Seals, 1.2 mm, Gold-Plated, for Agilent GCs, pk.10The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.Note: The 1.2 mm inlet seal is recommended when installing two columns using a two-hole Vespel/graphite ferrule.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21306

EUR 334.00

Beschikbaar op korte termijn

Replacement Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.2

Restek Replacement Inlet Seals, 1.2 mm, Siltek Treated, for Agilent GCs, pk.2The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.To reduce breakdown and adsorption of active compounds, use a gold-plated or Siltek-treated seal. Use a stainless-steel seal for analyses of unreactive compounds.Note: The 1.2 mm inlet seal is recommended when installing two columns using a two-hole Vespel/graphite ferrule.- Available in stainless steel, gold-plated, or Siltek-treated. Gold plating or Siltek treatment provide enhanced inertness versus stainless steel.- All seals include washers.

Art.-Nr.: RT-21307

EUR 77.00

Beschikbaar op korte termijn