Retour à la page d'accueil
Retour à la page d'accueil
Retour à la page d'accueil
GC Inlet Nuts and Plugs

Filtre

26 Produits
Vue
Septum Nut For Agilent 5890/6890/6850 GCs, ea.
Septum Nut For Agilent 5890/6890/6850 GCs, ea.
Restek Septum Nut For Agilent 5890/6890/6850 GCs, ea.- Needle guide allows easy penetration and prevents septum coring.- Manual injection septum nut allows use of 26-gauge needles for on-column injections.- Made of high-quality stainless steel.

Art.-Nr.: RT-20631

EUR 61.00

En cours de réapprovisionnement

Capillary Nut, Brass, For Varian GC, pk.2
Capillary Nut, Brass, For Varian GC, pk.2
Restek Capillary Nut, Brass, For Varian GC, pk.2

Art.-Nr.: RT-20881

EUR 37.00

En cours de réapprovisionnement

Capillary Nut, Stainless Steel, For Varian GC, pk.2
Capillary Nut, Stainless Steel, For Varian GC, pk.2
Restek Capillary Nut, Stainless Steel, For Varian GC, pk.2Choose brass or stainless steel construction.

Art.-Nr.: RT-20882

EUR 46.00

En cours de réapprovisionnement

Capillary Nut, SS, For Agilent GCs (For use with standard 1/16" ferrules), pk.2
Capillary Nut, SS, For Agilent GCs (For use with standard 1/16" ferrules), pk.2
Restek Capillary Nut, SS, For Agilent GCs (For use with standard 1/16" ferrules), pk.2Available in brass or stainless steel.

Art.-Nr.: RT-20883

EUR 46.00

En cours de réapprovisionnement

Fingertight Column Nut For Agilent "Compact" Ferrules For Agilent GCs, pk.2
Fingertight Column Nut For Agilent "Compact" Ferrules For Agilent GCs, pk.2
Restek Fingertight Column Nut For Agilent "Compact" Ferrules For Agilent GCs, pk.2Finger-tight capillary column nuts are an excellent alternative to conventional column nuts. They can be installed by hand without a wrench, and they cool down much faster than conventional fittings, making column and inlet maintenance easier. These stainless-steel fittings work best with graphite-type ferrules and help prevent over-tightening, which can cause graphite material to exude into the inlet.- Allow wrench-free column installations.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.

Art.-Nr.: RT-21040

EUR 64.00

En cours de réapprovisionnement

Fingertight Column Nut For Agilent Standard 1/16" Ferrules For Agilent GCs, pk.2
Fingertight Column Nut For Agilent Standard 1/16" Ferrules For Agilent GCs, pk.2
Restek Fingertight Column Nut For Agilent Standard 1/16" Ferrules For Agilent GCs, pk.2Finger-tight capillary column nuts are an excellent alternative to conventional column nuts. They can be installed by hand without a wrench, and they cool down much faster than conventional fittings, making column and inlet maintenance easier. These stainless-steel fittings work best with graphite-type ferrules and help prevent over-tightening, which can cause graphite material to exude into the inlet.- Allow wrench-free column installations.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.

Art.-Nr.: RT-21041

EUR 64.00

En cours de réapprovisionnement

Septum Nut, Needle Guide, 26 Gauge For Agilent GCs, ea.
Septum Nut, Needle Guide, 26 Gauge For Agilent GCs, ea.
Restek Septum Nut, Needle Guide, 26 Gauge For Agilent GCs, ea.- Needle guide allows easy penetration and prevents septum coring.- Manual injection septum nut allows use of 26-gauge needles for on-column injections.- Made of high-quality stainless steel.

Art.-Nr.: RT-21309

EUR 67.00

En cours de réapprovisionnement

Fingertight Nut, For Agilent "Compact" Ferrules For Agilent GCs, ea.
Fingertight Nut, For Agilent "Compact" Ferrules For Agilent GCs, ea.
Restek Fingertight Nut, For Agilent "Compact" Ferrules For Agilent GCs, ea.Tightens securely without wrenches; avoids stripped threads. Can be used with 0.25, 0.32, or 0.53 mm ID columns.

Art.-Nr.: RT-21311

Demande de prix

En cours de réapprovisionnement

Fingertight Nut, For Standard 1/16" Ferrules For Agilent GCs, ea.
Fingertight Nut, For Standard 1/16" Ferrules For Agilent GCs, ea.
Restek Fingertight Nut, For Standard 1/16" Ferrules For Agilent GCs, ea.- Tightens securely without wrenches; avoids stripped threads.- Can be used with 0.25, 0.32, or 0.53 mm ID columns.

Art.-Nr.: RT-21312

Demande de prix

En cours de réapprovisionnement

Detector Plug Nuts, For Agilent GCs, pk.2
Detector Plug Nuts, For Agilent GCs, pk.2
Restek Detector Plug Nuts, For Agilent GCs, pk.2- Use to cap off an injector to isolate leaks.- Use to cap off a detector for thermal cleaning.- Use to check a detector or make-up gas flow rate.- Use to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.

Art.-Nr.: RT-21883

EUR 47.00

En cours de réapprovisionnement

Capillary Nut, SS, For Agilent GCs (For use with Agilent "compact" ferrules), pk.2
Capillary Nut, SS, For Agilent GCs (For use with Agilent "compact" ferrules), pk.2
Restek Capillary Nut, SS, For Agilent GCs (For use with Agilent "compact" ferrules), pk.2Available in brass or stainless steel.

Art.-Nr.: RT-21884

EUR 47.00

En cours de réapprovisionnement

Reducing Nut for Agilent 5890/6890 GCs, ea.
Reducing Nut for Agilent 5890/6890 GCs, ea.
Restek Reducing Nut for Agilent 5890/6890 GCs, ea.Made from high-quality stainless steel. Meets original manufacturer's equipment performance.

Art.-Nr.: RT-22078

EUR 58.00

En cours de réapprovisionnement

Septa Nut for Shimadzu 17A, 2010, and 2014 GCs, Similar to Shimadzu Part #221-41286-00, 221-44584-00
Septa Nut for Shimadzu 17A, 2010, and 2014 GCs, Similar to Shimadzu Part #221-41286-00, 221-44584-00
Restek Septa Nut for Shimadzu 17A, 2010, and 2014 GCs, Similar to Shimadzu Part #221-41286-00, 221-44584-00, ea.- One-piece design for ease of installation and removal.- Features a built-in needle guide.- Made of clear anodized aluminum and high-quality stainless steel.

Art.-Nr.: RT-22079

EUR 112.00

En cours de réapprovisionnement

Hot Swap Capillary Column Nut For Agilent Standard 1/16" Ferrules For Agilent GCs, ea.
Hot Swap Capillary Column Nut For Agilent Standard 1/16" Ferrules For Agilent GCs, ea.
Restek Hot Swap Capillary Column Nut For Agilent Standard 1/16" Ferrules For Agilent GCs, ea.Never worry again about burned fingers or having to wait for the injector to cool down. The Hot Swap capillary column nut allows you to change your capillary column while the injector temp is still hot.Note: For proper operation, oven fan must be kept operational during change out or risk of burn may occur.- Heat-dissipating design lets you change capillary columns while the injector is still hot - without burning your fingers!- Reduces instrument downtime; no need to wait for the injector to cool down.- Finger-tight fitting installs quickly and easily without tools.

Art.-Nr.: RT-22347

EUR 85.00

En cours de réapprovisionnement

Hot Swap Capillary Column Nut For Agilent "Compact" Ferrules For Agilent GCs, ea.
Hot Swap Capillary Column Nut For Agilent "Compact" Ferrules For Agilent GCs, ea.
Restek Hot Swap Capillary Column Nut For Agilent "Compact" Ferrules For Agilent GCs, ea.Never worry again about burned fingers or having to wait for the injector to cool down. The Hot Swap capillary column nut allows you to change your capillary column while the injector temp is still hot.Note: For proper operation, oven fan must be kept operational during change out or risk of burn may occur.- Heat-dissipating design lets you change capillary columns while the injector is still hot - without burning your fingers!- Reduces instrument downtime; no need to wait for the injector to cool down.- Finger-tight fitting installs quickly and easily without tools.

Art.-Nr.: RT-22348

EUR 85.00

En cours de réapprovisionnement

PTV Slotted Capillary Column Nut for Gerstel CIS 3 and CIS 4 PTV inlets, pk.2
PTV Slotted Capillary Column Nut for Gerstel CIS 3 and CIS 4 PTV inlets, pk.2
Restek PTV Slotted Capillary Column Nut for Gerstel CIS 3 and CIS 4 PTV inlets, pk.2

Art.-Nr.: RT-22349

EUR 73.00

En cours de réapprovisionnement

Extended Capillary Nut Kit for standard 1/16" ferrules Includes extended reducing nut and extended c
Extended Capillary Nut Kit for standard 1/16" ferrules Includes extended reducing nut and extended c
Restek Extended Capillary Nut Kit for standard 1/16" ferrules Includes extended reducing nut and extended capillary nut for std. 1/16" ferrules, For Agilent GCs, ea.- Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.- Finger-tight design to allow wrench-free use.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.- Meets or exceeds original manufacturer's performance.- Read our technical article on how using extended reducing nuts makes it easier to properly install a GC column in your Agilent split/splitless inlet.

Art.-Nr.: RT-22633

EUR 123.00

En cours de réapprovisionnement

Extended Capillary Nut Kit for compact ferrules Includes extended reducing nut and extended capillar
Extended Capillary Nut Kit for compact ferrules Includes extended reducing nut and extended capillar
Restek Extended Capillary Nut Kit for compact ferrules Includes extended reducing nut and extended capillary nut for compact ferrules, For Agilent GCs, ea.- Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.- Finger-tight design to allow wrench-free use.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.- Meets or exceeds original manufacturer's performance.- Read our technical article on how using extended reducing nuts makes it easier to properly install a GC column in your Agilent split/splitless inlet.

Art.-Nr.: RT-22634

EUR 123.00

En cours de réapprovisionnement

Extended Reducing Nut For Agilent GCs, ea.
Extended Reducing Nut For Agilent GCs, ea.
Restek Extended Reducing Nut For Agilent GCs, ea.- Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.- Finger-tight design to allow wrench-free use.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.- Meets or exceeds original manufacturer's performance.- Read our technical article on how using extended reducing nuts makes it easier to properly install a GC column in your Agilent split/splitless inlet.

Art.-Nr.: RT-22635

EUR 76.00

En cours de réapprovisionnement

Extended Capillary Nut For std. 1/16" ferrules, For Agilent GCs, ea.
Extended Capillary Nut For std. 1/16" ferrules, For Agilent GCs, ea.
Restek Extended Capillary Nut For std. 1/16" ferrules, For Agilent GCs, ea.- Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.- Finger-tight design to allow wrench-free use.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.- Meets or exceeds original manufacturer's performance.- Read our technical article on how using extended reducing nuts makes it easier to properly install a GC column in your Agilent split/splitless inlet.

Art.-Nr.: RT-22636

EUR 69.00

En cours de réapprovisionnement

Extended Capillary Nut For compact ferrules, For Agilent GCs, ea.
Extended Capillary Nut For compact ferrules, For Agilent GCs, ea.
Restek Extended Capillary Nut For compact ferrules, For Agilent GCs, ea.- Visible below inlet insulating cup for easy, breakage-free column installation without removing cup.- Finger-tight design to allow wrench-free use.- Available for standard (1/16") and compact (Agilent-style) ferrules.- Made from high-quality stainless steel.- Meets or exceeds original manufacturer's performance.- Read our technical article on how using extended reducing nuts makes it easier to properly install a GC column in your Agilent split/splitless inlet.

Art.-Nr.: RT-22637

EUR 62.00

En cours de réapprovisionnement

Nut for Terminal Fitting for Thermo TRACE GCs, pk.2
Nut for Terminal Fitting for Thermo TRACE GCs, pk.2
Restek Nut for Terminal Fitting for Thermo TRACE GCs, pk.2

Art.-Nr.: RT-24896

Demande de prix

En cours de réapprovisionnement

Fixing Nut for Capillary Column for Split/Splitless Injector on Thermo TRACE, 8000, 8000 TOP & Focus
Fixing Nut for Capillary Column for Split/Splitless Injector on Thermo TRACE, 8000, 8000 TOP & Focus
Restek Fixing Nut for Capillary Column for Split/Splitless Injector on Thermo TRACE, 8000, 8000 TOP & Focus SSL, pk.5Made of high-quality stainless steel.

Art.-Nr.: RT-24973

EUR 57.00

En cours de réapprovisionnement

Column Nut for Shimadzu 2030 GCs, pk.2
Column Nut for Shimadzu 2030 GCs, pk.2
Restek Column Nut for Shimadzu 2030 GCs, pk.2- 1.2 mm nut bore permits easy removal of ferrules with a standard tapered-needle file (cat.# 20106).- Made of brass to prevent thread stripping on the transfer line.- Design enhances ease of threading onto the transfer line and improves overall lifetime.

Art.-Nr.: RT-27217

EUR 38.00

En cours de réapprovisionnement

Hot Swap Nut for 1/16" Fittings, ea.
Hot Swap Nut for 1/16" Fittings, ea.
Restek Hot Swap Nut for 1/16" Fittings, ea.- Heat-dissipating design lets you change capillary columns while the injector is still hot—without burning your fingers!- Reduces instrument downtime; no need to wait for the injector to cool down.- Finger-tight fitting installs quickly and easily without tools.Note: For proper operation, oven fan must be kept operational during change out or risk of burns may occur.Note: We recommend you use this product with the capillary installation gauge, (cat.# RT-27227).

Art.-Nr.: RT-27224

EUR 62.00

En cours de réapprovisionnement

Ce site Web utilise des cookies pour garantir la meilleure expérience possible. Plus d'informations...
Upload in progress, please be patient ...