MXT Connectors for GC Systems

MXT Connector

18 Ürün

Connector Kit, MXT connector for 0.25mm ID Fused Silica Columns

MXT-Union Connector Kit for Metal and/or Fused Silica GC Columns, 0.25 mm ID

Restek MXT-Union Connector Kit for Metal and/or Fused Silica GC Columns, 0.25 mm IDThese MXT connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit contains the MXT union; two 1/32-inch nuts; and two, one-piece, fused silica adaptors.- Low dead volume, leak-tight connection.- Reusable.- Siltek treatment ensures maximum inertness.- Ideal for connecting a guard column or transfer line to an analytical column.- Use to oven temperatures of 350 °C.- Can also be used for connecting fused silica to metal.

Art.-Nr.: RT-21386

EUR 214.00

Mevcut

Connector Kit, MXT connector for 0.32mm ID Fused Silica Columns

MXT-Union Connector Kit for Metal and/or Fused Silica GC Columns, 0.32 mm ID

Restek MXT-Union Connector Kit for Metal and/or Fused Silica GC Columns, 0.32 mm IDThese MXT connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit contains the MXT union; two 1/32-inch nuts; and two, one-piece, fused silica adaptors.- Low dead volume, leak-tight connection.- Reusable.- Siltek treatment ensures maximum inertness.- Ideal for connecting a guard column or transfer line to an analytical column.- Use to oven temperatures of 350 °C.- Can also be used for connecting fused silica to metal.

Art.-Nr.: RT-21385

EUR 214.00

Mümkün olan en kısa sürede tedarik edilecektir

Connector Kit, MXT connector for 0.53mm ID Fused Silica Columns

MXT-Union Connector Kit for Metal and/or Fused Silica GC Columns, 0.53 mm ID GC

Restek MXT-Union Connector Kit for Metal and/or Fused Silica GC Columns, 0.53 mm ID GCThese MXT connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit contains the MXT union; two 1/32-inch nuts; and two, one-piece, fused silica adaptors.- Low dead volume, leak-tight connection.- Reusable.- Siltek treatment ensures maximum inertness.- Ideal for connecting a guard column or transfer line to an analytical column.- Use to oven temperatures of 350 °C.- Can also be used for connecting fused silica to metal.

Art.-Nr.: RT-21384

EUR 214.00

Mümkün olan en kısa sürede tedarik edilecektir

Connector Kit, MXT Y-Connector for 0.25mm ID Fused Silica Columns

MXT "Y"-Union Connector Kits for Metal and/or Fused Silica GC Columns, 0.25 mm ID

Restek MXT "Y"-Union Connector Kits for Metal and/or Fused Silica GC Columns, 0.25 mm IDThese MXT connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit contains the MXT union; three 1/32-inch nuts; and three, one-piece, fused silica adaptors.- Low dead volume, leak-tight connection.- Reusable.- Siltek treatment ensures maximum inertness.- Ideal for connecting a guard column or transfer line to an analytical column.- Use to oven temperatures of 350 °C.- Can also be used for connecting fused silica to metal.

Art.-Nr.: RT-21389

EUR 291.00

Mevcut

Connector Kit, MXT Y-Connector for 0.32mm ID Fused Silica Columns

MXT "Y"-Union Connector Kits for Metal and/or Fused Silica GC Columns, 0.32 mm ID

Restek MXT "Y"-Union Connector Kits for Metal and/or Fused Silica GC Columns, 0.32 mm IDThese MXT connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit contains the MXT union; three 1/32-inch nuts; and three, one-piece, fused silica adaptors.- Low dead volume, leak-tight connection.- Reusable.- Siltek treatment ensures maximum inertness.- Ideal for connecting a guard column or transfer line to an analytical column.- Use to oven temperatures of 350 °C.- Can also be used for connecting fused silica to metal.

Art.-Nr.: RT-21388

EUR 291.00

Mümkün olan en kısa sürede tedarik edilecektir

Connector Kit, MXT Y-Connector for 0.53mm ID Fused Silica Columns

MXT "Y"-Union Connector Kits for Metal and/or Fused Silica GC Columns, 0.53 mm ID

Restek MXT "Y"-Union Connector Kits for Metal and/or Fused Silica GC Columns, 0.53 mm IDThese MXT connectors can be used with fused silica tubing because of a Valcon polyimide, 1/32-inch, one-piece fused silica adaptor. This unique graphite-reinforced composite allows a capillary column to slide into the adaptor and be locked in place simply by loosening and tightening the fitting. Each kit contains the MXT union; three 1/32-inch nuts; and three, one-piece, fused silica adaptors.- Low dead volume, leak-tight connection.- Reusable.- Siltek treatment ensures maximum inertness.- Ideal for connecting a guard column or transfer line to an analytical column.- Use to oven temperatures of 350 °C.- Can also be used for connecting fused silica to metal.

Art.-Nr.: RT-21387

EUR 291.00

Mümkün olan en kısa sürede tedarik edilecektir

Restek Ferrule, Vespel/Graphite 1/32"x.4mm for MXT® Connector, pk.5

Ferrules, Vespel/Graphite, 1/32" x 0.4 mm ID, for MXT Connector, pk.5

Restek Ferrules, Vespel/Graphite, 1/32" x 0.4 mm ID, for MXT Connector, pk.5

Art.-Nr.: RT-21039

EUR 144.00

Mümkün olan en kısa sürede tedarik edilecektir

Restek Ferrule, Vespel/Graphite 1/32"x.5mm for MXT® Connector, pk.5

Ferrules, Vespel/Graphite, 1/32" x 0.5 mm ID, for MXT Connector, pk.5

Restek Ferrules, Vespel/Graphite, 1/32" x 0.5 mm ID, for MXT Connector, pk.5

Art.-Nr.: RT-20259

EUR 180.00

Mümkün olan en kısa sürede tedarik edilecektir

Valco Connector, 1/32" Fused Silica Adapter, 0.5mm=0.8mm, pk.5

Valco 1/32" Adaptor Ferrules, Valcon Polyimide, Fused Silica, 0.5 ≤ 0.8 mm, pk.5

Restek Valco 1/32" Adaptor Ferrules, Valcon Polyimide, Fused Silica, 0.5 ≤ 0.8 mm, pk.5

Art.-Nr.: RT-20141

EUR 125.00

Mevcut

MXT Low-Dead-Volume Connector Kit for Metal Columns, 0.18/0.25/0.32 mm ID Tubing

Restek MXT Low-Dead-Volume Connector Kit for Metal Columns, 0.18/0.25/0.32 mm ID TubingThese low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430 °C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing.- Connect a guard column/transfer line to an MXT stainless-steel column.- Low thermal mass tracks rapid oven temperature programming.- Stainless-steel ferrules and nuts.- Siltek treatment ensures ultimate inertness.Each kit contains the MXT union, two 1/32-inch ferrules and nuts.

Art.-Nr.: RT-20536

EUR 173.00

Mümkün olan en kısa sürede tedarik edilecektir

MXT Low-Dead-Volume Connector Kit for Metal Columns, 0.28 mm ID Tubing

Restek MXT Low-Dead-Volume Connector Kit for Metal Columns, 0.28 mm ID TubingThese low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430 °C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing.- Connect a guard column/transfer line to an MXT stainless-steel column.- Low thermal mass tracks rapid oven temperature programming.- Stainless-steel ferrules and nuts.- Siltek treatment ensures ultimate inertness.Each kit contains the MXT union, two 1/32-inch ferrules and nuts.

Art.-Nr.: RT-20397

EUR 173.00

Mümkün olan en kısa sürede tedarik edilecektir

MXT Low-Dead-Volume Connector Kit for Metal Columns, 0.53 mm ID Tubing

Restek MXT Low-Dead-Volume Connector Kit for Metal Columns, 0.53 mm ID TubingThese low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430 °C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing.- Connect a guard column/transfer line to an MXT stainless-steel column.- Low thermal mass tracks rapid oven temperature programming.- Stainless-steel ferrules and nuts.- Siltek treatment ensures ultimate inertness.Each kit contains the MXT union, two 1/32-inch ferrules and nuts.

Art.-Nr.: RT-20394

EUR 166.00

Mümkün olan en kısa sürede tedarik edilecektir

MXT Y Connector Kit For 0.28mm ID Tubing

MXT Low-Dead-Volume "Y" Connector Kit for Metal Columns, 0.28 mm ID Tubing

Restek MXT Low-Dead-Volume "Y" Connector Kit for Metal Columns, 0.28 mm ID TubingThese low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430 °C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing.Connect two MXT columns to one inlet or one MXT column to two detectors.Each kit contains the MXT union, three 1/32-inch ferrules and nuts.

Art.-Nr.: RT-20396

EUR 258.00

Mümkün olan en kısa sürede tedarik edilecektir

MXT Y Connector Kit For 0.32mm ID Tubing

MXT Low-Dead-Volume "Y" Connector Kit for Metal Columns, 0.18/0.25/0.32 mm ID Tubing

Restek MXT Low-Dead-Volume "Y" Connector Kit for Metal Columns, 0.18/0.25/0.32 mm ID TubingThese low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430 °C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing.Connect two MXT columns to one inlet or one MXT column to two detectors.Each kit contains the MXT union, three 1/32-inch ferrules and nuts.

Art.-Nr.: RT-20537

EUR 265.00

Mümkün olan en kısa sürede tedarik edilecektir

MXT Y Connector Kit For 0.53mm ID Tubing

MXT Low-Dead-Volume "Y" Connector Kit for Metal Columns, 0.53 mm ID Tubing

Restek MXT Low-Dead-Volume "Y" Connector Kit for Metal Columns, 0.53 mm ID TubingThese low dead volume connectors are Siltek treated to make them inert to active compounds, just like our MXT columns. They can be used at temperatures up to 430 °C without degrading the deactivated layer. Purchase the appropriate ferrules for connecting 0.28, 0.32, or 0.53 mm ID tubing.Connect two MXT columns to one inlet or one MXT column to two detectors.Each kit contains the MXT union, three 1/32-inch ferrules and nuts.

Art.-Nr.: RT-20395

EUR 258.00

Mümkün olan en kısa sürede tedarik edilecektir

Ferrule, SS 0.32mm for MXT Connector, pk.10

Ferrules, Stainless Steel for 0.25/0.32 mm ID MXT Columns and 1/32" MXT Connectors, pk.10

Restek Ferrules, Stainless Steel for 0.25/0.32 mm ID MXT Columns and 1/32" MXT Connectors, pk.10

Art.-Nr.: RT-20535

EUR 198.00

Mümkün olan en kısa sürede tedarik edilecektir

Ferrule, SS 0.59mm for MXT Connector, pk.10

Ferrules, Stainless Steel for 0.28 mm ID MXT Columns and 1/32" MXT Connectors, pk.10

Restek Ferrules, Stainless Steel for 0.28 mm ID MXT Columns and 1/32" MXT Connectors, pk.10

Art.-Nr.: RT-20398

EUR 189.00

Mümkün olan en kısa sürede tedarik edilecektir

Ferrule, SS 0.79mm for MXT Connector, pk.10

Ferrules, Stainless Steel for 0.53 mm ID MXT Columns and 1/32" MXT Connectors, pk.10

Restek Ferrules, Stainless Steel for 0.53 mm ID MXT Columns and 1/32" MXT Connectors, pk.10

Art.-Nr.: RT-20399

EUR 203.00

Mümkün olan en kısa sürede tedarik edilecektir

Filtre